spacer
home btn
spacer
A/V Distribution btn

Datapath Products
Video Capture Cards
High Definition Cards
Standard Definition Cards
Digital Signal Cards
OEMs
Video Ouput Cards
Video Wall Controllers
Past Datapath Products

Wyrestorm
HT BaseT
Splitters/Extenders
Pro-Series Matrixes
Waterproof Sreens
Video Converters

Data Center Solutions btn
spacer
Interesting DY NYE projects
About DT NYE btn
Support Procedures btn
FAQs btn
Contact Us btn
spacer




Datapath Products Video Capture Cards

Digital Signal Cards

Vision SDI2: NEWDrivers

The Vision SDI-2 is a new member of the Vision series, like its brethren in the Vision family it too is built on a PCI e4 architecture offering users 650MB/Sec of throughput. More importantly the Vision SDI2 card offers users the ability to work with the digital broadcast format SDI or Serial Digital Interface. The SDI format is unique for a variety of reasons most notably it offers users the ability to run HD signals over long cable distances.

Common SDI Markets

  • Broadcasting
  • Medical Endoscopy
  • Machine Vision – SDI Camera outputs

Vision SDI2 Features

  • Support for all 3G/HD/SD video modes up to 1080p 60Hz
  • Loop Through SDI  BNC connections
  • 64MB per channel, total 128MB on board frame buffer
  • On board processor for real time mode and sync detection
  • Audio output for each channel to an onboard SPDIF header (use with the Datapath Audio Output Module)
  • High quality scaling (7x5 Polyphase Filter)
  • Input status indicator lights
  • Long range, single co-ax cable support.  (150metres capturing 1080p, 300 meters capturing SD)

Technical Specs

Board format

PCI Express x4, plug-in card,

PCI Express bus master with scatter gather DMA providing maximum data rate of 650 MB/s

Card size

110mm x 170mm

Connectors

4 BNC connectors for SDI inputs and outputs

Maximum capture resolution  

3Gb/s

Maximum SDI bit rate

64MB per channel (total 128M)

Frame buffer memory

Supports SMPTE - 32 Payload Identifiers

Input mode detection

Supports SMPTE - 352 Payload Identifiers

Video modes

SD-SDI (480i/576i)

HD-SDI (up to 1080i)

3G-SDI (up to 1080p

2k Digital Cinema modes

Update rate

User defined. Captured frame rate will match the source providing max data rate (650MB/s) is not exceeded

Multi-buffered to eliminate tearing artifacts

Maximum current at +3.3V

0.45A

Maximum current at +12V

0.85A

Maximum power

12W

Operating temperature

0 to 35 deg C

Storage temperature

-20 to 70 deg C

Relative humidity

5% to 90% non-condensing

MTBF

100,000 hrs

Warranty

3 years


Vision DVI-DL: NEWDrivers

The Vision DVI-DL or Dual Link capture card is a new member of the Vision series, like its brethren in the Vision family it too is built on a PCI e4 architecture offering users 650MB/Sec of throughput. The Vision DVI-DL unit is a single input capture card capable of supporting 330MHz pixel clock and a maximum canvas of 4kx4k.

Features

  • HD video capture for all progressive and interlaced DVI/HDMI modes
  • Captures Quad-HD Digital Cinema modes at 24/25/30fps
  • 128MB on board frame buffer
  • Input equalization supporting longer input cables
  • High performance DMA to system memory or direct to graphics memory with scatter gather
  • High quality scaling (7x3 Polyphase filter)

Technical Specs:

Board Format

PCI-e x4 card, 110mm x 170mm. PCI-e bus master with scatter gather DMA providing a maximum data rate of 650MB/s.

Connectors

One Dual Link DVI-D connector.

Maximum Sample Rate

330 MHz DVI - Capable of Quad HD at 24/25/30fps.

Video Capture Memory

128 MB, triple buffered.

DVI-Dual-Link

Single Link and Dual Link modes auto detected.

Input Mode Detection

Automatic detection of input modes in hardware, enabling the tracking of mode changes in the source signal.

Pixel Transfer Formats

RGB: 5-5-5, 5-6-5 or 8-8-8 (24bit/32bit) pixels. YUV: 4:2:2. MONO: 8bit.

Update Rate

User defined, captured frame rate will match the source. Providing max data rate (650MB/s) is not exceeded.

Multi-buffered to eliminate tearing artifacts.

Video Format Options

DVI Dual-Link. DVI Single-Link.

Operating System Support

Windows® XP, Windows® Vista, Windows® Server 2003, Windows® Server 2008 and Windows® 7.

Power Requirements

Max current at +3.3V – 0.2A. Max current at +12V – 0.9A. Max power – 12 W

Operating Temperature

0 to 35 deg C / 32 to 96 deg F

Storage Temperature

-20 to 70 deg C / -4 to 158 deg F

Relative Humidity

5% to 90% non-condensing.

Warranty

3 years