Intelligent

        Enterprise

              Operation

                Solutions

  
 

 
 

Home
Up
OUTPUT CARDS
INPUT CARDS
CAPTURE CARDS
WALL CONTROLLERS
ACCESSORIES

 DATAPATH ACCESSORIES

                       

 

 

In addition to the main video components there are a few accessories designed to aid integrators with cable management, motherboard selection, and video extension.

Panel 16 (A)

A 1U x 19 inch add on product for use with VisionSwitch and Mosaic cards. The panel is designed to improve video input and video output socket identification and produce neater, more reliable wiring.

 

 

   Panel-16

Panel-16 is a 1U x 19inch panel that has 16 BNC sockets/adapters which are compatable with the 16 way BNC splitter cables (BNC16-cable) supplied with the Datapath VisionSwitch range and Mosaic range of PCI cards. The Panel-16 allows you to individually wire any of the BNC plugs from the BNC16-cable to sockets on the rear of the Panel-16.
  Panel-16A

The Panel-16A is a 1U x 19 inch panel containing 16 BNC sockets and a Printed Circuit Board (PCB) with a 26 way D socket. A special cable is provided which connects the Panel-16A directly to the VisionSwitch or Mosaic card without the need for the BNC16-cable as used with the Panel-16

 
DFI Motherboard
Datapath are now able supply the DFI-ACP G7V600-B Motherboard complete with a special Datapath BIOS designed specifically for use with the complete range of Datapath products, offering increased reliability for your video wall or data wall system.

 

  • Supports Intel® Pentium 4 Prescott Processor.

  • Hyper-Threading Technology.800Mhz/533Mhz system data bus.

  • Processor socket: Socket 775

  • .Intel® chipset.Intel® 915GV Express chipset.

  • Intel® 8280IFB I/O Controller Hub (ICH6).

  • Four 184-pin DDR SDRAM DIMM Sockets.

  • Supports dual channel (128bit wide) memory interface

  • Unbuffered PC3200 (DDR400) or PC2700 (DDR333) DDR SDRAM DIMM

  • Supports a maximum of 4GB system memory up to 512 Mbit technology for x8 and x16 devices, non-ECC memory.

  • Special Datapath BIOS for use with Datapath products.

 

 VQS-01

The Datapath VQS-01 is a display wall controller which connects to the VGA output of any PC and displays the image across 4 displays. Each display shows 1/4 of the VGA image in a 2 x 2 format.

 

  
  • 2 x 2 VGA Display Wall Controller.
  • The VQS-01 accepts analog or DVI VGA video input.
  • Outputs to 4 displays. Each Display shows 1/4 of the VGA image. (2 x 2 format)
  • The VQS-01 supports both analog and DVI displays.
  • A stand alone unit that requires no software or other hardware to be installed on your machine.
  • Multiple units can be used for larger wall configurations.